Galvanized Eye Bolts - Shoulder Pattern
| Part No. | Thread Size UNC-2A | Shank Length (inches) | I.D. Eye | O.D. Eye | Overall Length (inches) | Center Of Eye To Shoulder | Net Weight (lbs) | Rated Capacity (lbs) | Buy Now |
|---|---|---|---|---|---|---|---|---|---|
| 88708 | 1/4-20 | 1.00 | 3/4 | 1-3/16 | 2-3/8 | 3/4 | 0.04 | 650.00 | Buy Now |
| 88710 | 5/16-18 | 1 1/8 | 7/8 | 1 7/16 | 2 13/16 | 15/16 | 0.09 | 1,200 | Buy Now |
| 88712 | 3/8-16 | 1 1/4 | 1.00 | 1 11/16 | 3 9/32 | 1 1/18 | 0.17 | 1,550 | Buy Now |
| 88714 | 7/16-14 | 1 3/8 | 1 1/16 | 1 13/16 | 3 9/16 | 1 1/4 | 0.24 | 2,000 | Buy Now |
| 88716 | 1/2-13 | 1 1/2 | 1 3/16 | 2 1/8 | 3 31/32 | 1 3/8 | 0.38 | 2,600 | Buy Now |
| 88718 | 9/16-12 | 1 5/8 | 1 1/4 | 2 5/16 | 4 1/2 | 1 9/16 | 0.51 | 3,200 | Buy Now |
| 88720 | 5/8-11 | 1 3/4 | 1 3/8 | 2 9/16 | 4 3/4 | 1 21/32 | 0.71 | 5,200 | Buy Now |
| 88724 | 3/4-10 | 2.00 | 1 1/2 | 2 13/16 | 5 1/4 | 1 13/16 | 0.99 | 7,200 | Buy Now |
| 88728 | 7/8-9 | 2 1/4 | 1 11/16 | 3 3/16 | 5 31/32 | 2 1/8 | 1.48 | 10,600 | Buy Now |
| 88740 | 1 1/4-7 | 3.00 | 2 3/16 | 4 7/16 | 8 7/32 | 2 15/16 | 4.40 | 21,000 | Buy Now |
Technical details
Notes: Rated capacity is for 0º vertical pulls. Never apply loads greater than Rated Capacity to any eyebolt. Forged from bar quality fine grain C1030 / C1035 steel bar.
Safety Warnings:
- Rated capacity limit is drastically reduced when loading at any angle.
- Loading must never be made at an angle greater than 45 degrees from bolt centerline.
- At an angle up to 45 degrees rated capacity is reduced to of the tabulated value.
- Direction of Pull Rated Capacity: 0 degrees 100% of rated capacity, 1 - 15 degrees 80% of rated capacity, 16 - 30 degrees 65% of rated capacity, 31 - 45 degrees 30% of rated capacity, 46+ degrees is not recommended.
- Never apply loads greater than Rated Capacity to any eyebolt.
- Always use a shoulder eye bolt when performing angular lifts. Angular lifting using plain pattern eye bolts is not recommended.
- Proof tested in accordance with ASTM A489 and Federal Spec. ANSI B18.15.
- Traceability and Mechanical test values are available with each shipment upon request.
